设为首页  加入收藏
   
长效中国足球比赛
滚镀中国足球比赛
镍磷中国足球超级联赛
白铜锡系列
枪黑、代铬
保护剂系列
其它电镀中国足球超级联赛
联系我们
深圳市球探比分即时比分有限公司
联 系 人 :肖彩楝  先生
联系电话:13243796333
固定电话:0755-36938431
公司传真:0755-61673689 
 
产品展示
  产品中心 << 首页:您的位置
 产品 >> 所有产品
 
产品编号:
510252216
产品名称:
HX-S Pearl Nickel
规  格:
长效型中国足球比赛
产品备注:
沙丁镍中国足球超级联赛、中国足球比赛、缎面镍中国足球超级联赛
产品类别:
长效中国足球比赛
 
   产 品 说 明
 

HX-S PearlNickel Process

1. Characteristics   TEL:+8613243796333

1).The sense of sand thickness with exquisite, soft and strong metallic finishing; non-easy contaminate by finger mark. Keeping consistent and even in the plating, the color is matte white with slight lustre.

2).This process is applied to all upscale hardware and plasticBathware, Furniture hardware, Computer, Electron device and etc.

3) This Pearl Nickel can be instead of HX-SC1 fine-white sand agent or HX-SC2 semi-white sand agent per the requirements of products.

2. Plating ingredients and operation conditions:

Ingredients and Conditions

Operation Scopes

Standards

Nickel sulfate

420-500g/L

450g/L

Nickel chloride

35-50g/L

45g/L

Boric acid

35-45g/L

42g/L

HX-SA Make Up Agent

5-18ml/L

15ml/L

HX-SB Adjuvant

6-12ml/L

8ml/L

HX-SC Sand Agent

0.6-1.8ml/L

0.5ml/L

Timing

1-5 Minutes

4 Minutes

Current density

3-8 Amps/ square decimeter

4 Amps/ square decimeter

Temperature

52-60

58

PH

4.0-4.8

4.5

Stirring method

Mechanical stirring, moving repeatedly or rotating   

Filtration

No request filtration for producing 10-15 days, the plating solution is requested to filter after treatment of Carbon Activated per producing 15-30 days.

Flow of Plating Solution

Non-stop circulation by using magnetic pump,

No need to circulate and keep the heat preservation with no production  

3. The ingredients for plating solution ofPearlNickel

1). Pour 60% water into the clean barrel and heat it to60.

2). Add all necessary Nickel sulfate, Nickel chloride and Boric acid; mix them to dissolve completely.

3). Add 2-5g/L of the Carbon Activated and stir with hours. 

4). Filter the plating solution to clean plating tank and under-current electrolyze 6-8 hours with 1V voltage.

5). Adjust the PH value within the operation scopes and add the requested water.

6). Add the Pearl Nickel HX-SA and HX-SB while stirring. (Add HX-SC after dilute to 10 times of water and stir gently, motionless electrolyte 10-20 minutes for the plating solution after stirring it with10 minutes, then start to plating).

7). Strong recommend using the air pump for circulation in production.

4. The management and maintenance for plating solution ofPearlNickel

Regularly analyse the elementary ingredients of plating solution and adjust the volumes within operation scopes. Conduct the Hull Cell Testing before daily operation to adjust the additive volume under the optimum condition, or refer to below additive volume for adjustment.    

1.) Additive consumptions:

                          

Name of the Additive                    Consumption / 1000 Amps / H

HX-SA Make Up Agent                             120- 160 ml.

(Refill more if get shining and foggy in high section)      

           

HX-SB Adjuvant                                    50-100 ml.

(Get glossy by added too much coating)

HX-SC Sand Agent                                 100-150 ml.

(Add it for sandy thinning or sandy slowly)                   

2). Refer to the standard make-up volume for the new barrel.      

3). Refill volume for running 8 hours without filter the plating solution.   

HX-SA Make Up Agent          Make-up volume 10-20% (1 ml.)

HX-SB Adjuvant                Make-up volume 5-10% (0.6 ml.)

HX-SC Sand Agent             Make-up volume 20-50% (0.4 ml.)

4). Refill make-up volume after wick filter the plating solution.  

HX-SA Make Up Agent              Make-up Volume 0-10%0.5ml.

HX-SB Adjuvant                         Make-up Volume 0-5%0.5 ml.

HX-SC Sand Agent                   Make-up Volume 100%0.8 ml.

5). Refill volume after filter by wick and toner.

HX-SA Make Up Agent                  Make-up Volume10-30%2 ml.

HX-SB Adjuvant                            Make-up Volume 5-15%0.5 ml.

HX-SC Sand Agent                     Make-up Volume 100%0.8 ml.

6). Refill additive volume after the major treatment of the toner.  

HX-SA Make Up Agent                  Make-up Volume 30-60%6 ml.

HX-SB Adjuvant                            Make-up Volume 20-40%3 ml.

HX-SC Sand Agent                     Make-up Volume 100%0.8 ml.

点击数:886  录入时间:2014/5/1 【打印此页】 【关闭
 
网站首页 | 关于我们 | 新闻中心 | 企业荣誉 | 产品展示 | 下载中心 | 营销网络 | 人才招聘 | 成功案例 | 在线留言 | 联系我们
   工信部   |   雅虎   |   网易   |   新浪   |   搜狐   |   百度   |   谷哥   |  
深圳市球探比分即时比分有限公司   技术支持:出格  粤ICP备14013488号